ABSOLUTE Dial Depth Gage Series 7200
Liên hệ để báo giá
ABSOLUTE Dial Depth Gage Series 7200
Liên hệ để báo giá
Dial reading: 0.01mm or .001” Flatness of base face: 5µm or 2µm Contact point: Carbide-tipped ball point(needle point:7210, 7222) Measuring force: 1.4N (2.5N: 7213, 7214, 7217, 7218)
ABSOULTE Digimatic Depth Gage Series 571
Liên hệ để báo giá
ABSOULTE Digimatic Depth Gage Series 571
Liên hệ để báo giá
ABSOLUTE Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery. Base and measuring faces are hardened and micro-lapped. Optional wider extension base are available. (up to 450mm range models) With SPC data output.
Automated Measurement Cell Technology
Liên hệ để báo giá
Automated Measurement Cell Technology
Liên hệ để báo giá
Mitutoyo introduces its new Automated Measurement Cell technology – complete measurement solutions designed to improve quality, increase throughput, and decrease operating expense
Auxiliary Block Kit Series 515-for Bore Gage
Liên hệ để báo giá
Auxiliary Block Kit Series 515-for Bore Gage
Liên hệ để báo giá
Used for efficient zero-setting of dial bore gages and tubular inside micrometers(18-150mm)on a Height Master.
Center Master
Liên hệ để báo giá
Center Master
Liên hệ để báo giá
Allows quick measurement of center-to-center distance between holes Measurable hole diameters: Ø1-Ø38mm/.040"–1.50"
Contact Sensor
Liên hệ để báo giá
Contact Sensor
Liên hệ để báo giá
The Contact Sensor eliminates errors caused by jacking-up the height gage too much while taking measurements. When the scriber of a height gage touches a conductive workpiece, an indicator will light up to indicate that measurement can be taken, which will result in consistent height measurements Power...
Depth Micrometer Series 129-Interchangeable Rod Type
Liên hệ để báo giá
Depth Micrometer Series 129-Interchangeable Rod Type
Liên hệ để báo giá
• ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range. • The rod length can be adjusted in 1” or 25mm increments. • With ratchet stop for constant force. • With measuring rod clamp. • With SPC output (Series 329). • Supplied...
Depth Micrometer Series 329-Interchangeable Rod Type
Liên hệ để báo giá
Depth Micrometer Series 329-Interchangeable Rod Type
Liên hệ để báo giá
Ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range. The rod length can be adjusted in 25mm or 1in increments. With ratchet stop for constant force. With measuring rod clamp. With SPC output. With digit counter. Supplied in fitted plastic case.
Dial Depth Gage Series 527-with Fine Adjustment
Liên hệ để báo giá
Dial Depth Gage Series 527-with Fine Adjustment
Liên hệ để báo giá
Easier and faster reading of dial. Made of hardened stainless steed. Base and measuring faces are hardened and micro-lapped. Optional wider extension base are available.