• Call us now: 0903236486
  • Email: info@vntechco.vn

Categories

Sensor FX-500 Ver.2 (Fiber Sensors)

Availability : In stock
Liên hệ để báo giá

When the FX-500 series is used together with our super quality fiber, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models.
By being close to absolute values instead of modified digital values, changes in detection that could not be found in the past can now be monitored.

Compare

Product Series:  

FA Sensors

Representative Products line :  Fiber Sensors

Self Monitoring Sensor FX-550L SERIES

 

Representative Products: Sensor FX-500 Ver.2

Sensor FX-500 Ver.2

Product Advantages:

Improved the operability and visibility of the operation keys

Operation keys (setting switch and MODE key) have been renewed to be easy to operate. Also, the color of the keys has been changed from black to light gray to achieve good visibility in dim light.

[Previous]
Previous
[Upgraded (Ver. 2)]
Upgraded (Ver. 2)

High stability!

When the FX-500 series is used together with our super quality fiber, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models.
By being close to absolute values instead of modified digital values, changes in detection that could not be found in the past can now be monitored.

High stability!

A quality that surpassed that of standard fibers!

New fibers developed using a new manufacturing method adopted by our own factory along with a persistent quality control system.
The basic performance of a standard fiber is greatly enhanced!

A quality that surpassed that of standard fibers!

Max. 25 μs response time

FX-500 with its high response time contributes to improve productivity.

Max. 25 μs response time
Performing minute object detection when using a small diameter fiber is now possible with a high response time and longer sensing range.

HYPR(Hyper) mode incorporated

FX-500 in combination with small diameter fibers which can handle challenging detections, allows long sensing range.

HYPR(Hyper) mode incorporated
Note: When using FD-NFM2.

So accurate! Sharp detection with suppressed hysteresis

FX-500 with its accurate detection catches fractional differences in light intensity, achieving high precision and solving low-hysteresis applications.

Long range detection of small objects with small difference in light intensity [H-02 mode]

Long range detection of small objects with small difference in light intensity [H-02 mode]

Highly accurate detection while avoiding saturation [H-01 mode]

Highly accurate detection while avoiding saturation [H-01 mode]

Flat display with wide viewing angle

The large and high-contrast 7-segment display of high luminance provides clear visibility from a wide angle of view.

Flat display with wide viewing angle

Resolves variation in displayed incident light intensity
Display adjustment setting

The variation in display can be adjusted to random values. This helps to define proper instruction in a work order.

Resolves variation in displayed incident light intensity Display adjustment setting

Stable detection over long and short periods
Stabilized emission amount

The “four-chemical emitting element”, which we are the first to incorporate to maintain a stable level of light emission, has now become an industry standard.
FX-500 series continues to adopt the same emitting element as well as the “APC (Auto Power Control) circuit” which improves stability in short periods such as when the power is turned on.

Saves maintenance time
Threshold tracking function

This function performs automatic setting to threshold value by checking the incident light intensity at desired intervals in order to follow the changes in the light amount resulting from changes in the environment over long periods (such as dust). This contributes to reduction in maintenance hours.

■Detect deterioration in light intensity
(e.g. Useful in dusty environment)

Detect deterioration in light intensity
Self-diagnosis can be used with the threshold tracking function for added effectiveness.

Suitable for preventative maintenance
Self-diagnosis output [FX-502(P), FX-505(P)-C2]

FX-502(P) / 505(P)-C2 can set Output 2 as a selfdiagnosis output. When the teaching of Output 1’s threshold value is carried out, Output 2 is set concurrently with the setting randomly shifted by the amount of surplus of threshold value. Light intensity deterioration due to fiber breakage or dust accumulation can be notified as an alarm output.

Stable detection while being eco-friendly
Emission power & gain setting

In cases when the incident light intensity is saturated, the light emitting amount can be adjusted to the optimal level by AUTO without changing the response time. This allows stable detection with an optimal S/N ratio and saves energy by controlling the emitting electric current.

 
 
Auto mode (AUTO) and 3-level manual mode (H / M / L [fine-adjustable]) are incorporated.

Detecting a transparent sheet

Detecting a transparent sheet

Built-in logic functions
No PLC necessary, saving material and programming costs

■Logical calculation functions 3 logical calculations (AND, OR, XOR) are available with fiber sensor only. 3 logical operations can be selected against Output 1. Additional controller is not required so both wire-saving and cost reduction can be achieved.

 

Model:

Amplifiers

Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately.

TypeAppearanceModel No.Emitting
element
OutputExternal
input
Standard
type
FX-501Red LEDNPN open-collector transistor
FX-501PPNP open-collector transistor
2-output
type
FX-502NPN open-collector transistor 2 outputsIncorporated
(Switchable with Output 2)
FX-502PPNP open-collector transistor 2 outputs
Cable
type
FX-505-C2NPN open-collector transistor 2 outputs analog outputIncorporated
FX-505P-C2PNP open-collector transistor 2 outputs analog output

Quick-connection cables for FX-501(P)

Quick-connection cable is not supplied with the amplifier. Please order it separately.

TypeModel No.Description
Main cable
(3-core)
CN-73-C1Length: 1 m 3.281 ft0.2 mm2 3-core cabtyre cable, with connector on one end
Cable outer diameter: ø3.3 mm ø0.130 in
CN-73-C2Length: 2 m 6.562 ft
CN-73-C5Length: 5 m 16.404 ft
Sub cable
(1-core)
CN-71-C1Length: 1 m 3.281 ft0.2 mm2 1-core cabtyre cable, with connector on one end
Cable outer diameter: ø3.3 mm ø0.130 in
CN-71-C2Length: 2 m 6.562 ft
CN-71-C5Length: 5 m 16.404 ft
(Note):The material of Quick-connection cable will be changed from production in March 2013, as soon as the previous ones are shipped out.
・Conductor cross-sectional area has been changed from 0.15mm2 to 0.2mm2.
・Sheath diameter has been changed from ø3.0mm to ø3.3mm.

Main cable

CN-73-C□

Sub cable

CN-71-C□

Quick-connection cables for FX-502(P)

Quick-connection cable is not supplied with the amplifier. Please order it separately.

TypeModel No.Description
Main cable
(4-core)
CN-74-C1Length: 1 m 3.281 ft0.2 mm2 4-core cabtyre cable, with connector on one end
Cable outer diameter: ø3.3 mm ø0.130 in
CN-74-C2Length: 2 m 6.562 ft
CN-74-C5Length: 5 m 16.404 ft
Sub cable
(2-core)
CN-72-C1Length: 1 m 3.281 ft0.2 mm2 2-core cabtyre cable, with connector on one end
Cable outer diameter: ø3.3 mm ø0.130 in
CN-72-C2Length: 2 m 6.562 ft
CN-72-C5Length: 5 m 16.404 ft
(Note):The material of Quick-connection cable will be changed from production in March 2013, as soon as the previous ones are shipped out.
・Conductor cross-sectional area has been changed from 0.15mm2 to 0.2mm2.
・Sheath diameter has been changed from ø3.0mm to ø3.3mm.

Main cable

CN-74-C□

Sub cable

CN-72-C□

End plates

End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.

AppearanceModel No.Description
MS-DIN-EWhen cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. 
Make sure to use end plates when cascading multiple amplifiers together.
[2 pcs. per set]

Digital Display

Digital Fiber Sensor FX-500Digital Fiber Sensor at the industry’s leading edge

Three times higher emission power and 1.6 times longer sensing range than conventional models!

Digital Fiber Sensor FX-100Taking fiber sensors to the next level

Digital Fiber Sensor FX-410Just “Look” and “Turn”, simple, easy-to-use fiber sensor

Digital Fiber Sensor FX-300Constant advances achieving significant improvement of sensing performance

Digital Fiber Sensor FX-550L NEWIO-Link Compatible, High-level Self-diagnosis
Capable of diagnosing own state and reporting to the host device

 

Fibers

Fiber Sensors Search by Specifications - Matching part numbers of fiber are displayed below. Also a comparison table is created!
Custom-ordered products are available with different fiber lengths and sleeve lengths.
Super Quality FiberEmitter intensity is also stable due to few curvatures and gaps in the beam axis.
tough
Cylindrical Type FiberUser-friendly, high quality fiber. Improved centering accuracy and specularity.
Built-in Lens type has been added.
Flat Type FiberSince it has a thin, rectangular shape, it can be installed in narrow locations.
tough
Small Spot Fiber
(Lens for reflective type fiber)
Sensing of minute objects can be performed by combining the fiber and spot lens.
tough
Narrow Beam FiberIt is not easily affected by surrounding obstacles even in long distances.
105 ℃ heat-resistant fiber has been added to the product line-up.
tough
Wide Beam FiberSenses work with indefinite shape or position in the beam band without missing.
tough
Convergent Reflective Type FiberIt is a fiber in which the sensing distance is limited to a specific range.
tough
Retroreflective Type FiberSensing transparent objects is its advantage.
tough
Chemical / Oil-resistant FiberWith the case and fiber sheath made of PFA, the fiber can be used with various types of chemical liquids.
Reflective type has been added to the product line-up.

Heat-resistant FiberIt can be used under environments of -60 to +350 ℃ -76 to +662 .

Vacuum-resistant FiberUsable in high-temperatures of 300 ℃ 572  vacuum

Liquid Leak / Liquid Detection FiberIt corresponds to various liquid events, from the contact (wetted) type to the pipe mounting type, and up to leak detection.
tough
Fiber OptionsOption for Fibers.
Slit mask for thru-beam type wide beam fiber has been added.
Square Head FiberSpace-saving
Break-free, more flexible, square head fiber!
Oil resistant fibers have been added to the product line-up.
tough

Lens for fiber

Upper Communication Unit

 

Simple Wiring

External Input Unit

Manually Set

Analog Output

Color Mark Detection

High Speed / LED Sensing

Fiber for Leak/Liquid Detection

Others

 

 

Related products line:

Light Curtains / Safety Components

 

   
Area Sensors

 

 

Photoelectric Sensors / Laser Sensors

 

Micro Photoelectric Sensors

 

Inductive Proximity Sensors

 

Particular Use Sensors

 

Sensor Options

 

Wire-Saving Systems

 

Product details at: Catalog Sensor FX-500